 
|
A good-looking high-performance computer charging / discharging station with battery management for all current battery types.
With integral Equalizer for eight-cell Lithium-Ion, LiPo and LiFe batteries. Upto a maximum charge current of 6.5 A, optionally from a 12 Volt car battery or the 230 Volt mains using the integral 230 V mains supply.
The elegant and simple design of the device is made possible by the new Cap-Touch-System. Contactless sensors for the switch and the 3D- Hotkey allow a smooth and sealed surface without protruding controls.
Large and clear display of the charge parameters or battery data on the bright ,backlit 95 x 65 mm Mega LCD graphics monitor, which also is mounted below the sealed keypad. The menus are in 6 languages (English, german, french, italian, spanish and czech) and may be selected in software.
Particular emphasis has been placed upon quiet cooling fan with additional RPM and temperature control, so that the device may be used in the office and living areas without noise nuisance from the charger.
With integral Equalizer for Lithium-Ion, LiPo and LiFe batteries. After connecting the Lithium-battery pack to the charger, the cell count and voltage data of each cell is signalled to the charger. The charger is informed of the sells condition and with this feedback and can react accordingly.
The charger΄s wide charge current range of 0.1 to 6,5 A, and also in mains operation, the charger has 110 watts of power, this makes it suitable for small slow-fly models, transmitter and receiver batteries, and also for large surface and flight packs.
A powerful equalizer and high charge currents are important factors required for a fast battery charge An integral USB port with bootload function allow the software to be upadated so that the charger is always at the latest level.
Simple, secure operation and automatic storage of the essential battery data in the robbe BID system (Battery-IDentifications-System).
The special advantage of the BID-System:
Simply plug the BID-Key into the charger and the charge process begins
No tiresome searching through menus for the set-up parameter
maximum protection from mis-handling
storage of the relevant battery data in the BID chip
Naturally, the most important battery data can be stored on the BID-chip
The charger can charge batteries NOT fitted with BID-System!
A BID-Key is included with the charger
Functions:
Charge -discharge -cycle. 2 99 x discharge-charge
Adjustment of discharge - charge current, battery type and cell count.
Display of charge/discharge capacity
Display of charge-, peak - and input voltage
Display of discharged capacity made
Display of individual cell voltage for lithium batteries
USB port with boot load function
NC/NiMH-batteries
1
24 cells
With digital Delta-Peak-Automatic cut-off for NC- and NiMH-batteries.
LiIo-, LiPo-, LiFe-batteries
1
8 cells
Automatic cut-off using CC-CV-charge method
Lead batteries
1
12 cells (2...24V)
Automatic cut-off using CC-CV-charge method
Set includes:
1 Power Peak C8 EQ-BID 230V/12V charger
1 BID-Key
1 Equalizer Adapter JST XH (No. 8214) for connecting 2 - 6 S LiPo batteries with JST-H voltage sensor leads (Lama, G47, Align) to robbe Equalizers.
Technical Specifications:
Input voltage: 10-15 V DC oder 230V AC
Dimensions: 180 x 145 x 70 mm mm
Weight: 750 g
Charge current: 0,1...6,5 A (135 W) bei 12 Volt, 0,1...6,5 A (110 W) bei 230 Volt A
Charge current with cell count (12 V operation):
3S = 3 A
3S = 3...6,5A
6S = 6,5...5,3 A
c8S = 5....4A
|
Gift Certificates
Battery Chargers
